| Customization: | Available |
|---|---|
| Phase: | Three |
| Core: | Core-type Transformer |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
general
1.FSVR online feeder automatic voltage regulating transformer (short for feeder automatic voltage regulator) is a device to ensure the stability of output voltage by tracking the line voltage change and automatically adjusting the body ratio of the device.Can be in the range of plus or minus 20% to automatically adjust the input voltage, it is especially suitable for large voltage fluctuation of the circuit or pressure drop large circuit, the feeder series voltage regulator is installed in 6 kv, 10 kv, 35 kv lines in the back, in a certain range of line voltage adjustment, ensure the user's power supply voltage stability, reduce the line loss line.In addition, the FSVR feeder automatic voltage regulator is also suitable for the substation where the main transformer does not have the voltage regulation ability. This voltage regulator is installed on the transformer outlet side of the substation to ensure the outlet side bus voltage.In the national agricultural network, urban network, oil field, coal, chemical industry, substation and other fields have a wide range of applications.
Two, main characteristics
(1) Large capacity, low loss, small volume, easy to install and maintain;
(2) Automatically adjust the gear of three-phase on-load tap switch to track voltage change, with reliable operation and high voltage adjustment accuracy;
(3) The voltage reference, action delay, allowable range and limit of times can be adjusted according to needs, with flexible and convenient parameter setting;
(4) Display FSVR on-load tap switch gear number of actions and current gear, with high-grade and low-grade indication;
(5) It has the functions of upper and lower gear protection and action time limit, which effectively improves the reliability of the product;
(6) The controller has the functions of over-voltage drop and under-voltage protection. When the circuit is in the state of over-voltage and under-voltage, the controller automatically shuts down;Ensure the safe operation of on-load tap switches;
(7) The controller adopts industrial-grade control chip, with high reliability and strong anti-interference ability, and can adapt to the harsh outdoor environment;
(8) With RS485 communication interface, the controller parameters can be viewed and modified within 30m from the installation point through the wireless communication module.
(9) It can be customized to realize remote operation control through SIM card or wireless network;
Iii. Product standards
1. Production design standards
General technical requirements for voltage regulators
Gb1094-2013 Power transformer
Technical parameters and requirements for three-phase oil-immersed power transformers
GB/ T17468-1998 Guide for selecting Power Transformers
Gb10230-2007 On-load tap switch
GB/T1058 -- 1989 Guidelines for on-load tap Switches Applications
Code of Operation for power transformers
2. Acceptance criteria
Voltage of installation point of FSVR line automatic voltage regulation voltage regulator shall meet the requirements of GB/T12325-2008 standard of power supply voltage deviation: the sum of positive and negative power deviation of power supply voltage of 35kV and below shall not exceed 10% of the rated voltage;The allowable deviation of three-phase power supply voltage of 20kV and below is ±7% of the rated voltage;The allowable deviation of 220V single-phase supply voltage is +7% and -10% of the rated voltage.
Iv. Main technical parameters
1.Environmental conditions
1.1 Altitude: ≤3000m
1.2 Ambient temperature: -25ºC ~ +45ºC
1.3 Relative humidity: less than 90%
1.4 Anti-pollution ability: Level III
1.5 Installation tilt: & LT;2%
1.6 There is no pollution or corrosive medium around the device that seriously affects the insulation performance of the device. There is no danger of fire or explosion in the workplace and no violent vibration.
Note: When the working environment exceeds the above conditions, the user needs special instructions when ordering.
2. Technical parameters
2.1 Rated Capacity:
Rated capacity (KVA)
FSVR-630KVA FSVR-800KVA FSVR-1000KVA FSVR-1250KVA FSVR-1600KVA
FSVR-2000KVA FSVR-2500KVA FSVR-3150KVA FSVR-4000KVA FSVR-5000KVA
FSVR-6300KVA FSVR-8000KVA FSVR-10000KVA FSVR-16000KVA FSVR-20000KVA
2.2 Rated voltage: 6kV, 10kV, 35kV
2.3 Frequency ratio: 50 Hz
2.4 Voltage adjustment range: -30%~+10% (actual products according to orders)
2.5 gears: 7 and 9 gears
2.6 Connection group: Ya0
2.7 Transformer oil grades: 25#, 45#
2.8 Cooling method: ONAN
2.9 Insulation level:
LI60kV/AC25kV(6kV), LI75kV/AC35kV(10kV), LI200kV/AC85kV(35kV)
2.10 The FSVR line automatic regulating voltage regulator adopts fully sealed corrugated oil tank with oil temperature indication and pressure relief valve;Three-phase four-wire power supply is built into the box to provide sampling signal and working power for the controller.
3. Three-phase oil-immersed on-load tap changer:
3.1 switch all the contact resistance: associated with on-load tap-changer series, < 500 mu Ω
3.2 Switching time for electric operation: 10s
3.3 Switch transition resistance switching time: 15 ~ 24ms
3.4 electrical life of switch contacts at rated capacity: > 50000 times
3.5 switching mechanical life: > 500000 times
3.6 Switching transition mode: single resistance or double resistance
4. Voltage regulating controller
4.1 Power supply :AC/DC 115-265V, AC/DC 340-420V
4.2 Rated frequency :50Hz
4.3 power: 75 w
4.4 Analog input: 2-way voltage (0,250V)
4.5 Switching input: 10-channel null contact input
4.6 Switching output :2 channels (AC250V/380V l6A)
4.7 Measurement accuracy: Voltage (0.5%)
4.8 Anti-interference rating: it meets the requirements of IEC61000-4:1995 rating
Special note: disconnect the control box when the product is being tested
){kind=link}